Diamond Circular Saw Blade belong to the category of tools.
If they are not professionals, it is difficult to see the advantages and disadvantages through the naked eye. However, as long as we master the knack and observe carefully, we can see the effect of the whole product through some minor defects.They are similar in appearance.
1. Observe whether the weld and the matrix are closely welded.
Before brazing, there will be a weld between the weld and the matrix. manufacturer 600mm diamond saw blade.If the arc surface at the bottom of the tool head is fully fused with the matrix, there will be no gap. The gap indicates that the tool head on the diamond saw blade is not fully fused with the matrix, mainly because the arc surface at the bottom of the tool head is not uniform when polished.
2. look sideways to see if the head on the diamond saw blade is in the same straight line.
If the cutter head is not in the same straight line, it shows that the size of the is irregular and may be wide or narrow, which will lead to unstable cutting when cutting stone and affect the quality of the saw blade.
3. Measuring the weight of the saw blade
The heavier the diamond saw blade, the thicker the better, because the heavier the saw blade, the greater the inertia force when cutting, the smoother the cutting. Generally speaking, 350 mm diamond saw blade should be about 2 kg, 400 mm diamond saw blade should be about 3 kg.diamond segments of wall saw Blades
4. Check the hardness of the matrix
The higher the hardness of the matrix, the more difficult it is to deform. Therefore, whether the hardness of the matrix is up to the standard or not directly affects the quality of the saw blade. High temperature welding does not deform, and force majeure does not deform. It is a good matrix. After being processed into a saw blade, it is a good saw blade.
.jpg)
Copyright © boreway.com
Home |
About Us |
Products |
Quality Control |
News |
FAQ |
Contact Us |
Site Map