Silver welded cutting segments is cutting without edge collapse, high machining accuracy, straight cutting line without burr, stable feeding, fast moving, small single-layer, laminated SAW seam, no spark, no tail, no dragger.
When using the saw blade, it should be standardized and used correctly. Otherwise, it will affect Juju's real strength and the advantages of fast cutting.
1. when using, do not exceed the specified maximum speed. According to the customer's return visit experience over the years, when using the diamond saw blade, the maximum speed of the machine should not exceed 2650r/min. If your machine speed exceeds this speed, you need to customize the saw blade. Please be sure to feed back your situation to our salesperson before purchasing
2. when using, take protective measures, and wear protective covers, gloves, safety helmets, labor protection shoes and protective glasses.
Turbo segmented rim diamond dry cutters (small saw blades), diameter from 4"(105mm) - 9"(230mm), for fast cutting kinds of hard, medium hard, soft stone, like Granite, Marble, Sandstone, Limestone etc., and other construction materials like Concrete, Asphalt, Ceramic, Porcelain, Bricks, etc.
3. when installing the diamond saw blade, the performance and purpose of the saw table must be confirmed first. It is best to read the manual of the saw table first to avoid wrong installation and accidents.
4. when storing the saw blade, please hang the diamond saw blade vertically on a dry shelf, and be sure to avoid wet places. Never place the diamond saw blade flat on the ground or on the shelf. Flat placement will cause deformation of the alloy saw blade, and also cause the hidden danger of falling off of the blade during cutting.
Copyright © boreway.com
Home |
About Us |
Products |
Quality Control |
News |
FAQ |
Contact Us |
Site Map