,
Diamond saw blades generally use coolant when cutting stone.
What is the role of coolant:
One is to cool the heat generated by adjusting the friction during cutting, thereby prolonging the service life of the granite diamond saw blade;
The second is to lubricate the surface of the stone to be cut, make it smooth and flat, and reduce the resistance during cutting;
The third is the mutual friction between the stone chips after cutting and the fallen diamond powder, so that the diamond continues to emerge and the cutting speed is accelerated.
The diamond cutter head wholesaler manufactures good toughness and extended life, Diamond Cutting Marble Saw Blade, Sandstone, Marble, various hard stone with quartz , To serve users.
1. The pipe system must be introduced into the central part of the saw blade so that the coolant flowing out of the pipe flows from the tangential direction of the saw blade to the saw blade;
2. The holes on the pipe must be positioned so that the coolant flows to the center of the saw blade not at a right angle but at an angle of 45 degrees to 60 degrees;
3. The number of eyes must be selected so that the coolant can continuously flow through the entire length of the pipe and spit to the center of the saw blade at a pressure of 0.01 to 0.05 MPa;
4. In order to alternate deep cutting, the cooling liquid covers a sector area of 130 degrees, as shown in the figure below. By changing the length of the fork joint, the shape of the U-shaped tube or the distribution of the holes, the cooling liquid can cover a smaller sector area or become Single-sided fan-shaped cooling area.
Copyright © boreway.com
Home |
About Us |
Products |
Quality Control |
News |
FAQ |
Contact Us |
Site Map