Diamond cutter segment is a kind of efficient stone cutting tool at present, so it has been widely used, but many people don't know how to choose diamond cutter segment. Today, experts tell you how to judge the quality of diamond cutter segment.
First of all, observe the emery exposed on the diamond segment, and observe the concentration and distribution of the emery. A good diamond cutting segment, the content of carborundum is moderate, and the dispersion is even.
Secondly, we can start from two points.
First, observe the weld. If the weld is not continuous and the edge of the cutter segment is not vertically aligned with the base water tank, chip removal and heat dissipation will be affected. And it may cause the cutter segment to fall off.
Second, put the diamond segment in the hand, and observe whether the diamond segment is aligned with the matrix on the horizontal plane. If the segment is uneven and crisscross, it is likely to cause the plate edge collapse or even the head falling off during the use process.
Thirdly, compared with the thickness of diamond cutter segment and matrix. Generally, the cutter segment is about 1mm thicker than the matrix. The reason for this design is to avoid damaging the matrix and improve the service life of diamond cutter segment.
The above is the method of identifying the quality of diamond cutter segment summarized by experts. I hope you can learn it well and use it in practice.
.jpg)
Copyright © boreway.com
Home |
About Us |
Products |
Quality Control |
News |
FAQ |
Contact Us |
Site Map