Products category

Usage and Common Problems of Diamond Core drill

2019/8/9 10:28:35 Source:www.boreway.com

Usage and Common Problems of Diamond Core Drill

Application:

1.Perforation of hard and brittle non-metallic materials such as stone and ceramics.

2.Wall holes for installation of water, electricity, gas, air conditioning and pipes in buildings.

3.Drilling, cutting and coring of basic engineering such as expressway, Airport runway, bridge and tunnel

Boreway Diamond Core Drill

Common problem:

1. Does water diamond drill bits for concrete when it is used for the first time?

No need to open the edge. The cutting part of the water drill bit is diamond. During the drilling process, diamond particles play a cutting role. The hardness of the bonding agent (usually copper alloy) is less than that of diamond and is constantly worn, which makes new diamond particles continuously exposed for drilling and cutting, so no cutting edge is needed.

2. Water drills shake when drilling holes. Why do they always run away?

Because the diameter of the drill is relatively thick, please form an inclined angle of about 60 degrees between the front end of the drill and the wall when using it, and then gradually straighten the drill in the time of drilling about 5 mm, and then normal drilling operation!

4. Water drill drill bit bought back for the first time to use, which has a well-equipped drill bit is a bit shaky what is the reason, is the quality problem?

Because the bit is slightly irregular after opening. This situation only needs 10 minutes of normal drilling to run in, so it does not affect the use!

5. What should we do if the drill bit of the water drill is stuck?

Basically there is no good way. First remove the bit with the big wrench of the disassembly and assembly bit, then rotate slowly in the opposite direction with the wrench. If it can't rotate, you can tap the bit gently with the small hammer. Be careful not to use too much force when tapping. If it's too strong, it's easy to knock the bit out of shape and then it won't work next time.

Specification:

Diamond core drill specification:

Size	Outer diameter	Body thickness	Length of bit
28mm	27.2mm	2.8mm	40/400mm
32mm	32.2mm	3.0mm	40/400mm
38mm	38.2mm	3.2mm	40/450mm
44mm	44.2mm	3.2mm	40/450mm
51mm	51.2mm	3.2mm	40/450mm
63mm	63.2mm	3.4mm	350/450mm
76mm	76.2mm	3.4mm	350/450mm
83mm	83.2mm	3.4mm	350/450mm

Special specificition also available

TOP

Products category

Usage and Common Problems of Diamond Core drill

Hot products

Diamond Profile Wheels & Router Bits

Crown Shape Diamond Segments of Drill Bits

Graphite Plates for Diamond Sintering Mould

Sintering Mould for Diamond Core Bit

Automatic cold pressed machine for diamond segments

Diamond Segments Sintering Mold

Diamond Segments of Gang Saw Blades for Marble Block Cutting & Squaring

Diamond Segments Cuspate Top Turbo shape of drill bit

Diamond Concave Dry Cutters (small saw blades)

Normal Segmented Diamond Core Drill Bits for Concrete