The surface appearance quality of stone products is very important. It is the face of the stone products. Special attention should be paid to the protection of the product surface during the processing of stone products.
Therefore, special attention should be paid to the details of surface protection during the processing of stone products, otherwise the surface of the stone products will collapse and the appearance of the processed products will be extremely ugly, which will directly affect the appearance quality of the product after installation. Use the 5 inch Turbo Diamond Saw blade of boreway wholesaler , sharp cutting without chipping Works great on cutting & sawing stone and masonry material.
The surface defects of some products can be eliminated by edging, but the surface defects of some products cannot be eliminated by edging. For example, products with glazed sides, bonded products, countertop products with only one side polished on all four sides, etc.
The surface of the stone products is a bit cracked. If the surface is not treated properly, if these products are sent to the customer, the customer will definitely return the product and refuse to accept it.
There are clear standards for edge chipping, missing edges, and missing corners on the surface of the stone, and high-quality products are not allowed to have any edge chipping, missing corners, or missing edges.
Several appearances of stone surface collapse
(1) Edge cracking This phenomenon is manifested in the appearance of crack lines on the surface of the stone product. If the stone product is not repaired in time, the stone product will collapse from the crack line and fall off the stone, which will affect the appearance quality of the surface.
(2) Edge chipping and missing edges are manifested in the lack of a piece on the surface of the product, which is more serious in the chipping. The only way to deal with the edge chipping and missing edges is through the method of glue repair. Customers who are strict with the product will refuse to accept the glued product. For granite and sandstone collapsed edges and corners that are not firm and easy to fall off, use180mm Electroplated Circle Diamond Saw Blade, no trouble cutting.
(3) Tiny gaps This phenomenon is manifested as very small gaps on the surface of the stone. Under normal circumstances, it is not obvious with the eyes, and it seems to be no problem. However, the hand feels very scratchy when touched with the hand, sharp, and it can scratch and bleed the hand if it is not possible. After the two boards are put together and installed, it can be seen that the surface of the product has collapsed. However, in this case, the chipping can be eliminated as long as the method of deburring is used.
(4) Sawtooth edge This phenomenon is manifested in that the four edges of the surface of the product are in a sawtooth shape, and the edges are very sharp, which greatly affects the appearance of the product. Deburring cannot eliminate the chipping phenomenon of jagged edges.
(5) Corner drop This phenomenon is manifested by the drop of one or several corners at the four corners of the product surface, which is more serious in the surface collapse and can only be handled by the method of glue repair. When the missing corner is large, it must be repaired with stone of the same texture and color, otherwise the product can only be scrapped and redone. Customers who are strict with the product will refuse to accept the glued product. The edges and corners of granite and sandstone are not repaired firmly and easily fall off.
Copyright © boreway.com
Home |
About Us |
Products |
Quality Control |
News |
FAQ |
Contact Us |
Site Map
