Litchi Surface 45S Bush Hammer Roller for Surface Grinding
Description：
1. 45s bush hammer roller for surface grinding is used for grinding the
surface of granite, marble, concrete and other materials, grind into a rough
surface, It plays the role of anti-skid and also can play the role of decoration;
2. The repeated hit of these carbide tips into stone or concrete surface
creates a rough, pockmarked texture that looks like naturally weathered rock;
3. This segments of the bush hammer roller is carbides, each roller has 45
segments, this bush hammer roller can be used on automatic grinder machine;
4. 45s bush hammer roller for surface grinding is suggested that the
rotational speed is below 700 RPM, bush hammer tool is 5-6 times faster
than manual times, the cost is greatly saved.
5. The grit of bush hammer face can be adjusted and the size of adaptor
decide to its machine, other specifications can be ed according to requirements.
Feature:
Bush hammer tools usually used in the following aspects:
1. For floor preparation before laying new coatings;
2. To remove old glue and resin coatings, in particular thick resins;
3. For grinding floors, make the ground rough and do antiskid treatment;
4. For grinding floors, can be prepared for the subsequent ground laying materials;
5. For processing stone surface, pockmarked texture that looks like naturally
weathered rock.
Specification：
The following are the specifications of 45s bush hammer roller for surface grinding:
| Model |
Segment quantity |
Length |
Diameter |
Segment Size |
| BW-BHR-45s |
45s |
40mm |
54mm |
4.7mm |
Other specifications are available upon request.
All of our products have been strictly tested before access to market.
Other specifications can be customized according to requirements.
FAQ:
1. How could we know the quality, if we want to order your products?
Please just test them with a very small order, then you will know the quality.
At present,so many people in the world to use Chinese products, because
of the high quality and most competitive prices. We are professional
manufacturer in supplying diamond tools for more than 8 years. Anyway,
confirming our products quality, a small trial order for testing will be necessary.
2.Can you offer free samples?
We don’t offer free samples, according to our many years experience, we
think people get the samples by paying, they will cherish and appreciate
more what they get. But we are willing to give our potential customers a
special discount which they are used to do a testing. It is very important
to give us feedback, we appreciate it.
3.Does your company accept custom-made?
Surely, we accept it. Including different color, grit etc. We also can mark
your ownlogo and brand on the pad. Any new productsyou want us to
produce for you, just send us your drawing or sample, we will produce
the same one. We will not sell this kind of products to other customers
only if we get your permission.
ABOUT FEEDBACK
Please confirm the receipt of the products after you got them.
If you have any question about the products you received, please contact us
in time and we will try our best to solve the problem and make you satisfied.
Copyright © boreway.com
Home |
About Us |
Products |
Quality Control |
News |
FAQ |
Contact Us |
Site Map
Add / Delete to Basket